Choose from a full range of top-quality flooring tools and equipment. We have everything you’ll need to install, finish/refinish, and maintain beautiful hardwood, vinyl, and hybrid floors.
Panel Town & Floors is your one-stop shop for all your flooring supplies. From coatings, abrasives, and adhesives – to filler, putty, and subfloor preparation products – we have the highest-quality products.
Minimum Required Spread: Approximately 6 mils or 250 square feet per gallon
Required Clamping Pressure: Use only enough pressure to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods).
Method Of Application: Any method can be used for spreading as long as Open and Total Assembly Times are met (see above).
Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.
Limitations: Titebond Speed Set Wood Glue is not intended for exterior use or where moisture is likely. For exterior applications use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 59°F. Do not Freeze. Agitate adhesive monthly to reduce product settling. Adhesive is extremely fast setting. It is important to follow Assembly Time recommendations. Minimum clamp-time is 15 minutes. Longer clamp times may be beneficial.
Physical Properties
Type: Aliphatic resin emulsion
Calculated Voc: 5.6 g/L
State: Liquid emulsion
Weight Per Gallon: 9.3 lbs.
Color: White
Dried Film: Translucent
Flashpoint: 200°F
Solids: 60%
Viscosity: 3,600 cps.
Freeze / Thaw Stability: Not stable
PH: 4.7
Chalk Temperature: To assure a good bond, 59°F is the lowest recommended temperature for the glue, air and materials during application and drying.
Storage Life: 24 months in tightly closed containers at 75°F. For best results, mix glue every 30 days to reduce settling.
