Titebond All Purpose White Glue

Features & Benefits

• Ideal For Crafts, Home Repairs and General Woodworking!
• Fast Set
• Versatile
• Non-Toxic
• Water Resistant
• Dries Clear
• Paintable
• Water Cleanup

Application Guidelines

• Application Temperature: Above 50°F (10°C)
• Open Assembly Time: 5 minutes (70°F / 50% RH)
• Total Assembly Time: 10-15 minutes (70°F / 50% RH)
• Minimum Required Spread: 7 mils (typical)
• Required Clamping Pressure: Enough to bring joints tightly together (generally, 30-80 psi for HPL, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods).
• Method Of Application: Easily spread with a roller spreader or brush, or may be transferred to plastic bottles for finer gluing applications.
• Cleanup: Damp cloth while glue is wet. Scrape of and sand dried excess.
• Limitations: Titebond White Glue is not intended for exterior use or where moisture is likely. For exterior applications use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Not for structural or load bearing applications. Do not use when temperature, glue, or materials are below 50°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read MSDS before use. KEEP FROM FREEZING.

Physical Properties

• Type: Polyvinyl Acetate Emulsion
• Calculated Voc: 5.48 g/L
• State: Liquid
• Weight Per Gallon: 9.1 lbs.
• Color: White
• Dried Film: Clear
• Flashpoint: 200°F
• Solids: 46%
• Freeze / Thaw Stability: Stable
• Viscosity: 8,500 cps.
• PH: 4.7
• Chalk Temperature: To assure a good bond, 50°F is the lowest recommended temperature of the glue, air and materials during application.
• Storage Life: 24 months in tightly closed containers below 75°F

Bond Strength ASTM D-905 (On Hard Maple)

• Temperature: Room; Strength: 3,550 psi; Wood Failure: 50%
• Temperature: 150°F. Overnight; Strength: 1,600 psi; Wood Failure: 15%

SDS

4 oz.

8 oz.

16 oz.

1 Gal.

TDS

4 oz.

8 oz.

16 oz.

1 Gal.