Choose from a full range of top-quality flooring tools and equipment. We have everything you’ll need to install, finish/refinish, and maintain beautiful hardwood, vinyl, and hybrid floors.
Panel Town & Floors is your one-stop shop for all your flooring supplies. From coatings, abrasives, and adhesives – to filler, putty, and subfloor preparation products – we have the highest-quality products.
Minimum Required Spread: Approximately 6 mils or 250 square feet per gallon
Required Clamping Pressure: Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
Method Of Application: Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush.
Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.
Limitations: Titebond II Dark Wood Glue is not for continuous submersion or for use below the waterline. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 55°F. Due to low pH, product may cause corrosion on metal surfaces, test product before using where rusting/corrosion may be of concern. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Because of variances in the surfaces of treated lumber, it is a good idea to test for adhesion.
Physical Properties
Type: Cross-linking polyvinyl acetate
Calculated Voc: 3.0 g/L
State: Liquid
Weight Per Gallon: 9.1 lbs.
Color: Light brown
Dried Film: Brown
Flashpoint: 200°F
Solids: 48%
Freeze / Thaw Stability: Stable
Viscosity: 4,000 cps
PH: 3.0
Chalk Temperature: To assure a good bond, 55°F is the lowest recommended temperature of the glue, air, and materials during application.
Storage Life: 24 months in tightly closed containers at 75°F
