Choose from a full range of top-quality flooring tools and equipment. We have everything you’ll need to install, finish/refinish, and maintain beautiful hardwood, vinyl, and hybrid floors.
Panel Town & Floors is your one-stop shop for all your flooring supplies. From coatings, abrasives, and adhesives – to filler, putty, and subfloor preparation products – we have the highest-quality products.
2x Faster – 3x Thicker Than Traditional PVA Glues
Dries Clear – Paintable
Ideal For the Woodshop, Home And Craft Projects
Fill Small Cracks and Gaps
Unaffected By Finishes
Excellent Sandability on Wood
Designed For Interior Projects
Water Cleanup & Non-Toxic
Nonflammable — No Offensive Odor
Conforms To ASTM D4236
Application Guidelines
Application Temperature: Above 50°F (10°C)
Open Assembly Time: 3-5 minutes (70°F./50%RH)
Total Assembly Time: 10-15 minutes (70°F./50%RH)
Minimum Required Spread: Approximately 6 mils or 250 square feet per gallon
Required Clamping Pressure: Enough to bring joints tightly together (generally, 100-150 psi for soft woods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
Method Of Application: Plastic bottles for fine applications; glue may also be spread with a roller, speader or brush.
Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.
Limitations: Titebond Quick & Thick Multi-Surface Glue is not recommended for exterior use or where moisture is likely. For exterior applications, use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Not for structural or load bearing applications. Not recommended for photos, washable wearables, metals, plastics or rubber. Do not use when temperature, glue or materials are below 50°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read SDS before use. For wood, sand glued area thoroughly before staining. Store at room temperature. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.
Physical Properties
Type: Thixotropic polyvinyl acetate
Calculated Voc: 2.4 g/L
State: High-viscosity liquid
Weight Per Gallon: 9.0 lbs.
Color: White
Dried Film: Clear
Flashpoint: 200°F
Solids: 60%
Freeze / Thaw Stability: Stable up to 2 cycles
Viscosity: 36,500 cps
PH: 4.8
Chalk Temperature: To assure a good bond, 50°F is the lowest recommended temperature of the glue, air and materials during application.
Storage Life: 24 months in tightly closed containers at 75°F
