Choose from a full range of top-quality flooring tools and equipment. We have everything you’ll need to install, finish/refinish, and maintain beautiful hardwood, vinyl, and hybrid floors.
Panel Town & Floors is your one-stop shop for all your flooring supplies. From coatings, abrasives, and adhesives – to filler, putty, and subfloor preparation products – we have the highest-quality products.
Recommended For: Interior and Exterior Construction, Remodeling & Repair Projects
Compatible Materials: Common Building Materials Including Wood, Paneling, Drywall, Ceramic Tile, Metal, Concrete, Concrete Block, Foamboard and Tub Surrounds.
Ideal For Interior and Exterior Projects
Solvent-Based
Water-Resistant
Foamboard & Plastics
Long Working Time
Extremely Versatile
Application Guidelines
Application Temperature: 0°F to 100°F
Service Temperature Range: -20°F to 120°F
Working Time: Approximately 10-20 minutes for a 1/4″ bead
Prep: Surfaces must be clean and free of any material that may prevent adequate adhesion.
Application: Cut tip on slant for 1/4” to 3/8” bead. Puncture inner seal and place in cartridge gun. Apply adhesive to one of the surfaces in either a continuous or spot bead. Paneling or foam: Apply 1/4” bead around perimeter 1” from edge and two zigzag beads in middle. Framing members: Apply directly to studs. Press materials firmly together with a slight twisting motion. Nail as needed. For drywall, use fasteners in accordance with local building standards. Note: For large panels, bracing may be required until adhesive dries.
Cleanup: Tools and adhesive may be cleaned with acetone or mineral spirits. Follow solvent vendor’s precautions. NOTE: Test solvent on an out-of-the-way area to make sure it will not mar or attack the surface.
Limitations: Not designed for continuous submersion. When applying over paint, wallpaper, ceramic tile, or other thin non-porous surfaces, you must first “rough up” the area by sanding or scraping. Do not adhere one non-porous material to another since this will slow or prevent drying. Do not apply to polystyrene foam if the temperature is above 90°F.
Physical Properties
Type: Synthetic elastomeric polymer
State: Medium-viscosity mastic
Color: Tan
Solids: 74%
Viscosity: 130,000 cps
Voc: 300 g/L
Flashpoint: 0°F
Freeze / Thaw Stability: Will not freeze
Storage Life: 18 months in tightly closed containers at 75°F
