Choose from a full range of top-quality flooring tools and equipment. We have everything you’ll need to install, finish/refinish, and maintain beautiful hardwood, vinyl, and hybrid floors.
Panel Town & Floors is your one-stop shop for all your flooring supplies. From coatings, abrasives, and adhesives – to filler, putty, and subfloor preparation products – we have the highest-quality products.
Recommended For: Subfloor Installations, General Plywood Use, As Well As Filling Gaps and Irregularities in The Subfloor.
Compatible Materials: Common Building Materials, Including Wood, Engineered Lumber, Particleboard, OSB and Wet, Frozen and Treated Lumber.
Industry’s Best Subfloor Warranty
Voc-Compliant Solvent
Bridges Gaps
Reduces Nailing
Strong, Fast Grab
Exceptional Durability
Wet & Frozen Lumber
Extrudes 0°–100°F
Prevents Squeaks
Application Guidelines
Application Temperature: 0°F to 100°F
Service Temperature Range: -20°F to 120°F
Working Time: Approximately 20 minutes for a 1/4” bead
Prep: Surfaces must be clean and free of any material that may prevent adequate adhesion.
Application: Cut tip straight across for 3/8” to 1/2” bead. Puncture inner seal and place in cartridge gun. Apply adhesive to each furring strip, stud or floor joist to be covered. Adhere materials within 15 minutes. Position material to be bonded and press firmly for full contact with adhesive. Note: For subfloors, apply adhesive to joists for one sheet at a time. Nail or screw each sheet as recommended by the American Plywood Association.
Cleanup: Tools and adhesive may be cleaned with acetone or mineral spirits. Follow solvent vendor’s precautions.
Limitations: Not designed for continuous submersion or for use on plastics, polystyrene or polyethylene foams. Do not adhere one non-porous material to another as this will slow or prevent drying.
Physical Properties
Type: Proprietary synthetic polymer
State: Thixotropic medium-viscosity mastic
Color: Light beige
Solids: 64%
Viscosity: 125,000 cps
Voc: 50 g/L
Flashpoint: 0°F
Freeze / Thaw Stability: Will not freeze
Storage Life: 18 months in tightly closed containers at 75°F
Odor: Solvent (strong)
Coverage
10 oz. Cartridge
1/8” Bead: 129 ft.
1/4″ Bead: 30 ft.
3/8” Bead: 14 ft.
1/2″ Bead: 8 ft.
28 oz. Cartridge
1/8” Bead: 355 ft.
1/4″ Bead: 86 ft.
3/8” Bead: 39 ft.
1/2″ Bead: 21 ft.
Warranty Statement
Titebond PROvantage Subfloor Adhesive is covered by our Silver Total Performance Guarantee for Subfloors.
