Titebond Instant Bond Activator

Features & Benefits

• Designed For Use with All Titebond Instant Bond Adhesives
• Accelerates The Curing of Titebond Instant Bond Adhesives
• Especially Effective for Large Gaps, Very Porous Woods, and Bridge Bonding Joints
• Useful When Bonding Acidic Surfaces or In Low Humidity Conditions
• Heptane-Based Solvent Will Not Mar Finishes or Damage Plastics

Application Guidelines

• Application Temperature: Above 50°F (10°C)
• Assembly Time After Application: Immediate (70°F: 50% RH)
• Method Of Application: Spray bottle or brush
• Limitations: Titebond Instant Bond Activator is not intended for exterior use or where moisture is likely. Store in a cool, dry place. Handling and set times of Titebond Instant Bond Adhesives may be affected by environmental conditions. Product is extremely flammable. Keep away from heat, sparks, and flame.

Physical Properties

• Type: Heptane-based accelerator
• Reactive Voc: 720 g/L
• State: Liquid
• Weight Per Gallon: 6.59 lbs.
• Color: Clear
• Flashpoint: 15°F
• Viscosity: 3 cps
• Freeze / Thaw Stability: Stable
• Percent Volatile: 100%
• Specific Gravity: 0.79
• Storage Life: 24 months in unopened containers under 50°F

Caution Statement

DANGER: EXTREMELY FLAMMABLE LIQUID. VAPOR HARMFUL. Contains heptane and methylcyclohexane. Keep away from heat, sparks and fl ame. Use only with positive cross ventilation. Avoid breathing vapors. Do not swallow. Do not allow eye contact or prolonged skin contact. Exposure may cause CNS, eye, skin or respiratory system effects. FIRST AID: If inhaled, remove to fresh air. Seek medical attention if symptoms persist. Eye contact: Flush eye with water for 15 minutes and seek medical attention immediately. If swallowed, do not induce vomiting; contact physician immediately. For skin contact, wash contact area with soap and water. Contact physician if irritation persists. Refer to Safety Data Sheet for additional information. KEEP OUT OF THE REACH OF CHILDREN.

SDS

2 oz.

TDS

2 oz.