Choose from a full range of top-quality flooring tools and equipment. We have everything you’ll need to install, finish/refinish, and maintain beautiful hardwood, vinyl, and hybrid floors.
Panel Town & Floors is your one-stop shop for all your flooring supplies. From coatings, abrasives, and adhesives – to filler, putty, and subfloor preparation products – we have the highest-quality products.
Ideal For: General Construction, Remodeling and Repair Projects.
Seals: Vinyl, Aluminum, Glass, Marble, Granite, Painted Surfaces and Most Common Building Materials.
Premium Multi-Purpose Applications
NSF 51 Certified for Direct Food Contact
Non-Staining Versatile Formula
Withstands Extreme Temperature Changes
Will Not Crack or Become Brittle
No Shrinkage or Discoloration
Watertight Seal
Application Guidelines
Application Temperature: Above -40°F (-40°C)
Service Temperature Range: -60°F to 350°F (-51°C to 177°C)
Method Of Application: Cartridge/caulking gun
Working Time: Approximately 15-20 minutes for a 1/4″ bead
Application Directions: 1. Surfaces must be clean and free of any material that may prevent adequate adhesion. Properly designed joint not to exceed 1/2″ in width. 2. Remove nozzle, cut tip of the nub and puncture inner foil seal. 3. Screw nozzle onto cartridge and cut tip on slant for 1/4″ to 3/8″ bead and place in cartridge gun. 4. Force sealant into clean joint. If necessary, smooth bead immediately. It is the sole responsibility of the user to thoroughly test any proposed use with all substrates to determine project suitability.
Cleanup: Clean uncured material with mineral spirits or equivalent solvent. After curing, excess sealant must be cut or scraped away. Follow solvent vendor’s precautions when using solvents.
Coverage:
10.1 oz. Cartridge
1/8” Bead: 123 ft.
1/4″ Bead: 31 ft.
3/8″ Bead: 14 ft.
1/2″ Bead: 8 ft.
Limitations: Not designed for continuous submersion or use below the waterline. Do not apply if rain is expected within 12 hours. This product should not be painted. Not recommended for alkaline substrates. For best results, store in a dry location at or below 75°F.
Physical Properties
Type: Silicone
Calculated Voc: 50 g/L (3%)
Color: Clear, white and colors
Solids: 100%
Flashpoint: 200°F
Viscosity: 250,000 cps
Freeze / Thaw Stability: Stable
Storage Life: 24 months in a dry location at or below 75°F
Specifications
Exceeds:
ASTM C920
Federal Specification TT-S-00230C
TT-S-001543A
When fully cured, meets FDA regulation 21-CFR-177.2600.
NSF 51 Certified for direct food contact.
Warranty Statement
50 Year Limited Warranty: If not satisfied with product performance when used as directed, return container and proof of purchase to Franklin International, Inc. for replacement of product. Liability is limited to product replacement only.
There are no reviews yet.