Vermont Natural Coatings PolyWhey SEAL-PRO Clear Wood Floor Sealer -1 Gal.

Achieve professional-grade floor sealing with PolyWhey® SEAL-PRO Wood Floor Sealer by Vermont Natural Coatings. This advanced sanding sealer harnesses the power of natural whey protein technology to create an exceptional foundation for interior wood floors, whether bare, stained, or previously coated.

SEAL-PRO delivers outstanding performance where it matters most—sealing wood pores, minimizing grain raise, and preventing tannin bleed-through that can compromise your finish. The innovative formula provides excellent abradability for smooth sanding between coats while maintaining superior adherence properties that ensure compatibility with virtually all wood species, stains, and topcoat systems.

Ideal for hardwood floor refinishing projects on oak, maple, cherry, pine, and other wood species. This professional-strength sealer creates the perfect foundation for polyurethane topcoats, ensuring uniform appearance and maximum durability of your complete floor finishing system.

Application

• Surface preparation: Sand and prepare floor using NWFA industry standards. Vacuum and wipe surface clean prior to coating.
• Recommended applicators: Light weight T-bar, 3/8″ nap micro-fiber or synthetic roller or painters pad.
• Application: Stir sealer before applying.
• Pour a 2″ bead of sealer near the starting wall.
• Use a dampened T-bar sleeve, roller sleeve or painters pad and pull the sealer with the grain of the wood.
• Maintain a wet edge at all times.
• Feather out all turns.
• Avoid moving too quickly and maintain steady, medium pressure to avoid applicator drips.
• Make sure to apply sealer at the recommended coverage rate of 500-600 square feet per gallon.
• Do not apply too thin or too heavy.
• Allow 2 hours to dry.
• High humidity and/or low temperature conditions may increase dry time.
• For best results, apply in temps between 65˚F-80˚F with a relative humidity of 40%-60%.
• Up to 4 oz. of water per gallon may be added for variable application conditions.
• Between coats: For best results, abrade after PolyWhey 3000 application with a fine, 220 grit paper.
• If applying more than one coat of PolyWhey 3000, abrade if 24 hours have passed since the previous coat was applied.
• Always vacuum and tack thoroughly with a clean, damp cloth.
• 500-600 square feet per gallon

Technical

• Product Information Sheet
• Safety Data Sheet