Wakol MS-262 Flooring Adhesive – 1 Gal. (Case of 2)

WAKOL MS 262 is a firm flexible, one component modified silane wood flooring adhesive designed for interior installations. It provides strong bond performance with extended working time and no required flash time.

This moisture controlling adhesive is suitable for glue assist applications, sound control mat installations, and direct bonding of solid and engineered wood flooring. It can be applied directly over approved WAKOL moisture barriers and performs in environments up to 100 percent relative humidity.

Solvent free and water free, WAKOL MS 262 offers clean handling and easy cleanup before cure.

Features

• Moisture controlling MS polymer adhesive
• Firm flexible performance
• High bond strength
• Long open time
• No airing time required
• Solvent free
• Water free
• 0 g per liter VOC content
• EMICODE EC1 PLUS certified
• Easy cleanup before adhesive cures
• Compatible over approved WAKOL moisture barriers

Specifications

• Base: MS polymer
• VOC content: 0 g per liter US regulatory
• Working temperature: 60°F to 75°F
• Relative humidity range: 40 percent to 75 percent
• Open time: Approximately 40 minutes
• Airing time: None
• Light foot traffic: 6 to 8 hours
• Full cure: 24 to 48 hours depending on jobsite conditions
• Moisture resistance: Up to 100 percent relative humidity
• Shelf life: 18 months in unopened container at 70°F
• EMICODE: EC1 PLUS

Area of Application

Firm flexible one component adhesive in 20 oz foil tubes and 1.0 gallon foil tubes for interior installation of:

• End matched solid wood flooring up to 8 inch width, North American species
• Engineered wood flooring with no limitations

Application Method

Apply using:

• WAKOL Applicator 90 with WAKOL Replaceable Nozzles
• WAKOL Applicator 35
• WAKOL Manual Applicator

Coverage

1.0 gallon foil tube:

• Up to 90 sq ft

Actual coverage will vary depending on substrate and application method.

Technical

Technical Information 

Safety Data Sheet