Loba 2K Duo Water-Based Wood Floor Finish – 1 Gal.
$134.18 – $136.78
You may also like…
-
DuraSeal DuraClear Max Water-Based Wood Floor Finish – 1 Gal. – Max Satin
$141.89 -
Sale!
Basic Coatings StreetShoe NXT Water-Based Wood Floor Finish – 1 Gal.
$111.62 – $120.21 -
Sale!
Bona Traffic Go Water-Based Wood Floor Finish – 1 Gal.
Original price was: $166.29.$140.99Current price is: $140.99. -
Sale!
Bona Traffic HD Water-Based Wood Floor Finish – 1 Gal. – Satin
Original price was: $166.29.$140.99Current price is: $140.99.
PRODUCT DESCRIPTION
Specifications
- Coverage: 500-600 sq. ft. per gallon per coat
- Drying Time: Earliest possible recoating after 2-3 hours
- Cure:Â Fully cured after 5 days
Recommended Procedure for Wood Floors
- Prepare and prime the substrate properly, according to directions
- Allow the primer to dry as specified
- Apply Finish
- Allow to dry for a minimum of 2-3 hours
- Intermediate sanding with LOBASAND perforated pad 180 (or equivalent)
- Apply second layer of Finish
Recommended Procedure for Cork Floors
Seal cork only after the glue has sufficiently set (refer to manufacturer’s information). Roll on a maximum of 2 coats per day.
Untreated Natural Cork:
- Roll a total of three coats of finish onto the cork.
- Apply first coat and allow to dry 2-4 hours.
- Apply the second coat and allow to dry overnight (reduces risk of granule swelling).
- Intermediate sanding with LOBASAND perforated pad 180 (or equivalent) to remove grain raise. Vacuum floor then tack using a LOBA Mop and a new/clean LOBA microfiber mop pad lightly dampened with water to remove all dust.
- Apply final coat.
Prefinished Cork:
Note information given by the cork supplier. If suitable for recoating, apply one or two layers of coating after an intermediate sanding.
Renovation/Recoating of Old Coatings:
Basic cleaning with Remover. Use a rotary disk buffing machine and a LOBASAND SpecialPad green. Care product residues must be completely removed. Even small amounts of residue can adversely effect the bond of the coating. Clean with clear water (neutralize). After drying, perform a thorough intermediate sanding or preparation with LOBA 2k Contact. Apply coating in one or two layers by roller
Suitable Product Combinations
Primers:
- EasyPrime
- 2K Intensive
Stains:
- 2K IntensiveColor
Screen and Recoat
- Clean floor, abrade with LOBASAND 180 grit perforated pad (or equivalent). Vacuum floor then tack using a LOBA Mop and a new/clean LOBA microfiber mop pad lightly dampened with water to remove all dust.
- Apply finish following instructions.
- Always prepare test areas to determine compatibility, appearance, and desired results.
- Prefinished wood floors can be recoated without sanding if 2K Contact is used as an adhesion promoter before coating. Refer to the Technical Information of 2K Contact.
Compatibility
When this product is used in combination with other LOBA products the technical information of these products must be followed. Refer to the Technical Data Sheets. Lobaannot guarantee the suitability of products other than Loba.
Technical
ADDITIONAL INFORMATION
Additional information
Weight | N/A |
---|---|
Sheen | Satin, Semi-Gloss, Extra-Matte |
Reviews
Sign Up For Exclusive
Flooring Deals
Sign up for our e-newsletter and get 5% off your next online order.
Sign up for exclusive deals & savings!
Sign up for our e-newsletter and get 5% off your next online order.
All Fields Required