Choose from a full range of top-quality flooring tools and equipment. We have everything you’ll need to install, finish/refinish, and maintain beautiful hardwood, vinyl, and hybrid floors.
Panel Town & Floors is your one-stop shop for all your flooring supplies. From coatings, abrasives, and adhesives – to filler, putty, and subfloor preparation products – we have the highest-quality products.
Recommended For: Commercial and Residential Installation Of Rubber, Vinyl And Carpet Cove Bases, As Well As Stair Treads.
Compatible Materials: Common Wall Surfaces Including Plaster, Drywall, Gypsum Wallboard, Plywood, Hardboard Paneling, Tileboard, Wood, Painted and Primed Surfaces And Concrete.
Plus Performance – Adheres To Painted And Primed Surfaces
Interior Vinyl and Rubber
Eliminates Sagging
Quick Grab
Excellent Adhesion
Cleans Easily with Water In Wet State
Bonds To All Common Wall Surfaces
Environmentally Safe
Minimal Bracing Needed
Impact-Resistant
Voc-Compliant
Application Guidelines
Application Temperature: Over 40°F for adhesive and substrates
Service Temperature Range: 0°F to 120°F
Working Time: 5-10 minutes
Prep: Surfaces must be clean and free of any material that may prevent adequate adhesion.
Application: Cut tip on slant for 1/4” to 3/8” bead. Puncture inner seal and place in cartridge gun. Apply continuous parallel beads on the back of the cove base approximately 1” to 1 ½” apart. Press cove base firmly and uniformly against the wall within 5-10 minutes of applying adhesive. Note: Irregular or curved wall surfaces may require bracing until the adhesive has set.
Cleanup: Tools and adhesive may be cleaned with water while the adhesive is wet. If dried, tools and adhesive may be cleaned with water/acetone/vinegar mixture. Follow solvent vendor’s precautions.
Limitations: Titebond Cove Base Plus Adhesive is not designed for continuous submersion. When applying over paint, wallpaper, ceramic tile or other non-porous materials, “roughing up” the area by sanding or scraping will increase bond strength. For best results, store adhesive above 40°F.
