Titebond Extend Wood Glue

Features & Benefits

• Slower Speed of Set – Longer Working Time
• Excellent Heat-Resistance
• Water Cleanup & Non-Toxic
• Versatile – Bonds Wood, Particleboard, MDF, Plywood and Other Porous Materials
• Ideal For Complex Assemblies and Bent Laminations

Application Guidelines

• Application Temperature: Above 40°F (4°C)
• Open Assembly Time: 15 minutes (70°F./50%RH)
• Total Assembly Time: 20-25 minutes (70°F./50%RH)
• Minimum Required Spread: Approximately 6 mils or 250 square feet per gallon
• Required Clamping Pressure: Enough to bring joints tightly together (generally, 30-80 psi for HPL, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
• Method Of Application: Easily spread with a roller spreader or brush, or may be transferred to plastic bottles for finer gluing applications.
• Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.
• Limitations: Titebond Extend Wood Glue is not intended for exterior use or where moisture is likely. For exterior applications use Titebond III Ultimate Wood Glue or Titebond II Extend. Not for structural of load bearing applications. Do not use when temperature, glue or materials are below 40°F. Freezing may not affect the function of the product but may cause it to thicken. If product appears to have settled, stir to ensure uniformity. It is recommended that Titebond Extend Wood Glue not be stored for extended periods at temperatures lower than 40°F. NOTE: STIR PRODUCT BEFORE USE TO ENSURE UNIFORMITY. KEEP FROM FREEZING.

Physical Properties

• Type: Modified PVA emulsion
• Calculated Voc: 3.12 g/L
• State: Liquid
• Weight Per Gallon: 9.7 lbs.
• Color: Yellow
• Dried Film: Yellow
• Flashpoint: 200°F
• Freeze / Thaw Stability: Stable
• Solids: 42.3%
• Viscosity: 3,500 cps
• PH: 4.8
• Chalk Temperature: To assure a good bond, 40°F is the lowest recommended temperature of the glue, air and materials during application.
• Storage Life: 12 months in tightly closed containers at 70°F

Bond Strength ASTM D-905 (On Hard Maple)

• Temperature: Room; Strength: 3,510 psi; Wood Failure: 81%
• Temperature: 150°F. Overnight; Strength: 3,120 psi; Wood Failure: 61%

SDS

• 16 oz.
• 1 Gal.
• 5 Gal.
• 55 Gal.

TDS

• 16 oz.
• 1 Gal.
• 5 Gal.
• 55 Gal.