Choose from a full range of top-quality flooring tools and equipment. We have everything you’ll need to install, finish/refinish, and maintain beautiful hardwood, vinyl, and hybrid floors.
Panel Town & Floors is your one-stop shop for all your flooring supplies. From coatings, abrasives, and adhesives – to filler, putty, and subfloor preparation products – we have the highest-quality products.
Recommended For: Installing Ceiling Tiles Over Many Common Porous Surfaces
Compatible Materials: Acoustical Ceiling Tiles To Many Building Materials Including: Painted And Unpainted Drywall, Gypsum Wallboard, Concrete, Hardboard, Plywood And Wood.
Safe And Easy Installation
Water-Based
For Use On Acoustical Ceiling Tiles
Fast Grab – Excellent Adhesion
Nonflammable
No Offensive Odor
Water Cleanup While Wet
No Sag Installation
Passes Astm D-1779 Specification
Environmentally Safe
Voc-Compliant
Nfpa Class A Fire Rating When Tested In Accordance With ASTM E-84
Application Guidelines
Application Temperature: Over 50°F for adhesive and substrates
Service Temperature Range: 0°F to 120°F
Working Time: 15 minutes
Method Of Application: Mason’s trowel
Prep: Surfaces must be dry and free from any material that may deter adhesion.
Application: Let adhesive and materials acclimate to room temperature 24 hours before installing. Note: Do not use when temperature, adhesive or materials are below 50°F. Using the “butter” method, spread a thin layer of adhesive to cover a large area of each corner of tile. Then apply adhesive in 1” to 1 ½” mounds (golf ball size). Place mounds 2“ to 3” in from the corners on the back of the tile. Immediately press tile into position, working the tile back and forth ½” to flatten the mound of adhesive. Adhesive should be flattened to a mound ³/16” thick and 2 ½” in diameter. When installing interlocking tile, do not slide tile into groove of adjacent tile until it has been pressed against the ceiling to its proper level.
Cleanup: Tools and excess adhesive may be cleaned with water while the adhesive is wet. If dried, tools and adhesive may be cleaned with mineral spirits or equivalent solvent. Follow solvent vendor’s precautions when using solvents. NOTE: Test solvent on an out-of-the-way area to make sure it will not mar or attack the surface.
Limitations: For tiles larger than 12” x 12”, place a 1” to 1 ½” mound (golf ball size) of adhesive on each square foot corner. Please contact Technical Service at 1.800.347.4583 for questions concerning the amount of adhesive needed per panel. For best results, store Titebond GREENchoice Acoustical Ceiling Tile Adhesive above 50°F.
Physical Properties
Type: Polymer emulsion
State: Medium-viscosity mastic
Color: Beige
Solids: 70%
Viscosity: 200,000 cps
PH: 5.0
Voc: 50 g/L
Flashpoint: 200°F
Freeze / Thaw Stability: Stable
Storage Life: More than 2 years in unopened container
Odor: Mild
Coverage
Approximately 50-60 sq. ft. of ceiling tile per gallon.
Specifications & Certifications
Passes the performance specifications of ASTM D1779* and Section 01350 under CHPS Criteria, IEQ Credit 2: Low-Emitting Materials.
Exceeds the performance requirements of ASTM C557 and has been tested in accordance with ASTM E72 for racking and shearing.
This product has a NFPA Class A fire rating when tested in accordance with ASTM E-84 and meets LEED v4, SCAQMD, CARB and NAHB Green Building specifications.
Passes California Department of Public Health CDPH/EHLB/Standard Method version 1.1, 2010
*For ceiling panel weight restrictions, please call our Help Line at 1.800.877.4583.
