Choose from a full range of top-quality flooring tools and equipment. We have everything you’ll need to install, finish/refinish, and maintain beautiful hardwood, vinyl, and hybrid floors.
Panel Town & Floors is your one-stop shop for all your flooring supplies. From coatings, abrasives, and adhesives – to filler, putty, and subfloor preparation products – we have the highest-quality products.
Recommended For: Demanding Interior/Exterior Construction, Installation and Repair Projects.
Compatible Materials: Common Building Materials Including Trim, Paneling, Drywall, Foamboard, Tub Surrounds, Plastics, Metal, Masonry and Wet, Frozen and Treated Lumber.
Professional Strength & Performance
Water-Based
Environmentally Safe
Wet, Frozen, Or Treated Lumber
Offers Freeze/Thaw Stability
Cleans Easily with Water in Wet State
Cartridge And Carton Contain Post-Consumer Recycled Material
Waterproof
Strong Durable Bond
Bonds Most Materials
Interior/Exterior
Voc-Compliant
Application Guidelines
Application Temperature: 40°F to 100°F (5°C to 38°C)
Service Temperature Range: 0°F to 120°F
Working Time: Approximately 20 minutes for a 1/4″ bead
Prep: Surfaces must be clean and free of any material that may prevent adequate adhesion.
Application: Cut tip on slant for 1/4” to 3/8” bead. For subfloors, cut tip straight across. Puncture inner seal and place in cartridge gun. Apply adhesive to one of the surfaces in either a continuous or spot bead. Adhere materials within 15 minutes or before skinning of adhesive occurs. Press surfaces firmly together with a slight twisting motion. Certain large applications may require additional bracing until adhesive has dried. Note: For subfloors, apply adhesive to joists for one sheet at a time. Nail or screw each sheet as recommended by the American Plywood Association.
Cleanup: Tools and adhesive may be cleaned with water while the adhesive is wet. If dried, tools and adhesive may be cleaned with water/acetone/vinegar mixture. Follow solvent vendor’s precautions.
Limitations: Not designed for continuous submersion. Do not adhere one non-porous material to another since this will slow or prevent drying. Not recommended for use with mirrors.
Physical Properties
Type: Blend of polymer emulsions
State: Medium-viscosity mastic
Color: Beige
Solids: 75%
Viscosity: 75,000 cps
PH: 5.0
Voc: 50 g/L
Flashpoint: 200°F
Freeze / Thaw Stability: Stable
Storage Life: 18 months in an unopened container above 40°F
