We offer affordable vinyl and luxury vinyl plank flooring, prefinished flooring,
unfinished flooring, and a broad range of molding, underlayment, and vents.
Choose from a full range of top-quality flooring tools and equipment. We have everything you’ll need to install, finish/refinish, and maintain beautiful hardwood, vinyl, and hybrid floors.
Panel Town & Floors is your one-stop shop for all your flooring supplies. From coatings, abrasives, and adhesives – to filler, putty, and subfloor preparation products – we have the highest-quality products.
Bonds Melamine, Vinyl Coated Products, And HPL to Porous Materials
Thicker Formulation – Fewer Runs and Drips
Fast Setting – Excellent Strength
Dries Clear
Long Open Time
Fast Initial Tack
Application Guidelines
Application Temperature: Above 40°F (4°C)
Open Assembly Time: 5 minutes (70 °F./50%RH)
Total Assembly Time: 10-15 minutes (70°F./50%RH)
Minimum Required Spread: Approximately 6 mils or 250 square feet per gallon
Required Clamping Pressure: Enough to bring joints tightly together (generally, 30-80 psi for HPL,100-150 psi for softwoods,125-175 psi for medium woods and 175-250 psi for hardwoods)
Method Of Application: Easily spread with a roller spreader or brush, or may be transferred to plastic bottles for finer gluing applications.
Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.
Limitations: Titebond Melamine Glue is not intended for exterior use or where moisture is likely. Not for structural or load bearing applications. Vacuum pressing should only be used for veneers up to 1/16 inch in thickness. Do not use when temperature, glue or materials are below 40°F. If product has been frozen (gel-like appearance), it cannot be used. Read MSDS before use. KEEP FROM FREEZING. KEEP OUT OF REACH OF CHILDREN.
Physical Properties
Type: Specialized vinyl acetate emulsion
Calculated Voc: 77 g/L
State: Liquid
Weight Per Gallon: 8.6 lbs.
Color: White
Dried Film: Clear
Flashpoint: 200°F
Solids: 57%
Freeze / Thaw Stability: Unstable
Viscosity: 12,000 cps
PH: 4.0
Chalk Temperature: To assure a good bond, 40°F is the lowest recommended temperature of the glue, air and materials during application.
Storage Life: 24 months in tightly closed containers at 75°F
Bond Strength ASTM D-905
Substrates: Melamine/Melamine Lap Shears; Strength: 329 psi; Substrate Failure: 100%
