Titebond All Siding Sealant Almond

Features & Benefits

• Ideal For: Sealing Doors, Windows, Soffits and Awnings Around Vinyl, Aluminum, Stucco, Wood, Brick and Glass.
• Seals: Vinyl, Aluminum, Stucco, Wood, Brick, Cement, Glass, and Most Common Building Materials.
• Excellent Adhesion to Siding Materials
• Exterior – High Performance
• Superior Flexibility & Durability
• Easily Paintable – Water Cleanup
• Effective Barrier to Air, Dirt, Insects and Radon

Application Guidelines

• Application Temperature: Above 40°F (4°C)
• Service Temperature Range: -35°F to 180°F
• Method Of Application: Cartridge/caulking gun
• Working Time: Approximately 10-15 minutes for a 1/4″ bead
• Application Directions: 1. Surfaces must be clean and free of any material that may prevent adequate adhesion. Properly designed joint not to exceed 1/2″ in width. 2. Cut tip at 45° angle for 1/8″ to 1/2″ bead and place in cartridge gun. 3. Force sealant into clean joint. If necessary, smooth bead immediately. It is the sole responsibility of the user to thoroughly test any proposed use with all substrates to determine project suitability.
• Painting: The sealant should be dry to the touch and ready to paint in 2-4 hours with a high-quality acrylic, water-based (latex) paint that does not contain plasticizer. For other paint types, a compatibility test is recommended.
• Cleanup: Clean uncured material with water. After curing, excess sealant must be cut or scraped away.
• Coverage:
  • 10.1 oz. Cartridge
    • 1/8” Bead: 123 ft.
    • 1/4″ Bead: 31 ft.
    • 3/8″ Bead: 14 ft.
    • 1/2″ Bead: 8 ft.
• Limitations: Not designed for continuous submersion or use below the waterline. Air, sealant and surface temperature should be above 40°F. Do not apply if rain is expected within 12 hours. Cure time is dependent upon ambient conditions including temperature and humidity. The sealant should be dry to the touch and ready to paint in 2-4 hours with a high-quality acrylic, water-based (latex) paint that does not contain plasticizer. For other paint types, a compatibility test is recommended. It is highly recommended to use backing material. For best results, store in a dry location at or below 75°F.

Physical Properties

• Type: Acrylic
• Calculated Voc: 50 g/L (<1.5%)
• Color: White and colors
• Solids: 82%
• Flashpoint: Solvent free/Not applicable
• Viscosity: 450,000 cps
• Freeze / Thaw Stability: Stable
• Storage Life: 24 months in a dry location at or below 75°F

Specifications

• Exceeds:
  • ASTM C920 Grade NS Class 25
  • ASTM C834 Type OP Grade -18°C
  • Federal Specification TTS-00230C Type S Class A

Warranty Statement

45 Year Limited Warranty: If not satisfied with product performance when used as directed, return container and proof of purchase to Franklin International, Inc. for replacement of product. Liability is limited to product replacement only.

SDS

• Almond 3321

TDS

• Almond 3321