Titebond Kitchen and Bath Sealant Clear

Features & Benefits

• Ideal For: Sealing Around Tubs, Showers, Sinks and Countertops.
• Seals: Vinyl, Ceramic Tile, Porcelain, Plastic, Painted Surfaces, Aluminum, Glass, Marble, Brick, Wood, and Most Common Building Materials.
• For Use on Tubs, Showers, Sinks and Countertops
• Resistant To Dirt, Water, Stains and Mildew
• Once Cured, Will Not Shrink or Discolor Over Time
• Excellent Flexibility & Adhesion
• Permanently Seals

Application Guidelines

• Application Temperature: Above 40°F (4°C)
• Service Temperature Range: 0°F to 160°F (-17°C to 71°C)
• Method Of Application: Cartridge/caulking gun
• Working Time: Approximately 15 minutes for a 1/4″ bead
• Application Directions: 1. Surfaces must be clean and free of any material that may prevent adequate adhesion. Properly designed joint not to exceed 1/2″ in width. 2. Cut tip at 45° angle for 1/8″ to 1/2″ bead and place in cartridge gun. 3. Force sealant into clean joint. If necessary, smooth bead immediately. It is the sole responsibility of the user to thoroughly test any proposed use with all substrates to determine project suitability.
• Painting: The sealant should be dry to the touch and ready to paint in 4-6 hours.
• Cleanup: Clean uncured material with water. After curing, excess sealant must be cut or scraped away.
• Coverage:
  • 10.1 oz. Cartridge
    • 1/8” Bead: 123 ft.
    • 1/4″ Bead: 31 ft.
    • 3/8″ Bead: 14 ft.
    • 1/2″ Bead: 8 ft.
• Limitations: Not designed for continuous submersion or use below the waterline. Air, sealant and surface temperature should be above 40°F. Allow at least 24 hours before exposing to water. Cure time is dependent upon ambient conditions including temperature and humidity. The sealant should be dry to the touch and ready to paint in 4-6 hours. It is highly recommended to use backing material. For best results, store in a dry location at or below 75°F.

Physical Properties

• Type: Modified Acrylic
• Calculated Voc: 50 g/L (<1.5%)
• Color: White and clear
• Solids: 72% white, 60% clear
• Flashpoint: Solvent free/Not applicable
• Freeze / Thaw Stability: Stable
• Viscosity: 250,000 cps
• Storage Life: 24 months in a dry location at or below 75°F

Specifications

• Clear Exceeds:
  • ASTM C834 Type C Grade NF
  • FDA 21-CFR-177.2600

Warranty Statement

Liability is limited to product replacement only.

SDS

• Clear 1711

TDS

• Clear 1711